Description
The SeaStar Autopilot pump is a fixed flow, reversible type set that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes (type 1 & type 2). It can be used as a stand alone pilot pump or can be mounted to a previously installed SeaStar Power Assist unit and can prevent the need to break into the hydraulic lines.
Part # AP1219, AP1233, AP2419 and AP2433
Features
• Long life DC Motor (i.e. long life brushes).
• Compact design.
• Simplified installation.
• Low power consumption.
• ABYC, CE and J1171 compliant.
• Superior corrosion resistance
• Quiet operation.
• Mounting bracket included.
• Stand alone or mounts to SeaStar Power Assist unit.
• Replaces other 12 & 24 volt pumps.
……………………………………………………………………………………………………………………………………………..
TYPICAL INSTALLATIONS
……………………………………………………………………………………………………………………………………………..
SPECIFICATIONS
TECHNICAL
Voltage 12 or 24 Volts
Fittings Compatible with standard SeaStar Hoses (HO51xx etc.)
Oil Compatibility SeaStar Steering Fluid (MIL 5606)
Weight 4.9 lbs (2.2kg)
Autopilot Pump Sizes Type 1: 60 in3/min (no load)
Type 2: 100 in3/min (no load)
Max Pressure 1000psi
Typical Current Draw(Depending on application) 12 or 24 Volts
12V Type 2: 5 – 11 amps
24V Type 1: 2 – 4 amps
24V Type 2: 3 – 6 amps
STAND ALONE PILOT PUMP (Can be retro fitted to a SPA unit)
Type 1: 12V–60cu”/min Part No. AP1219
Type 2: 12V–100cu”/min Part No. AP1233
Type 1: 24V–60cu”/min Part No. AP2419
Type 2: 24V–100cu”/min Part No. AP2433
WIRE DETAILS
Length 24″
Gauge 12 awg
Connector None – Bare Leads
AUTOPILOT PUMP CYLINDER CAPACITY
Type 1 4.9 in3 – 12.5 in3
Type 2 12.5 in3 – 21 in3
SPAA RETRO FIT KIT (3 Bolts / 3 O-rings)
Part No. HA1205
ADD A STATION KIT (Allows a SeaStar Pilot Pump
to be added into a manual hydraulic circuit.)
Part No. HF5501